Your Source for Quality Reconditioned Test Equipment. We are the best VALUE in test and measurement! HP 8165A/002 50MHz Programmable Signal Source 1mHz to 50 MHz, Sine, Square, Triangle, 10mV to 10V Output, GPIB Check out our other great test equipment Description: The 8165A Programmable Signal Source can meet your many signal source requirements with programmable sine, triangle, pulse, ramp and square waveform output capabilities. Synthesizer stability with precision amplitude control make this a versatile source. Option 002 adds AM modulation and frequency sweep capability. Sine, square, and triangle waveforms (50% duty cycle) 1 mHz to 50.00 MHz with an accuracy of ±0.001% Pulse and ramp waveforms from 1 mHz to 20 MHz Voltage ranges from 10.0 mV p-p to 10.0 V p-p into 50 Ohms and 2.00 V p-p to 20.0 V p-p open circuit DC offset up to ± 5 Volts into 50 Ohms, ± 10 Volts open circuit Operating modes: Normal, VCO (external), Triggered, Gated, Burst, FM Option 002 AM Modulation and Frequency Sweep Condition: Reconditioned and Performance Tested to meet manufacturers specifications. Clean unit inside and out. Physically inspected, hardware re-torqued, connectors treated with a preservative, controls and switches lubricated as appropriate, power supply electrolytics tested, battery replaced. Burned in for 72 hours and then performance tested. All knobs and switches are in good condition. What do our grades mean? Click Here Need Your Unit Repaired/Reconditioned Please contact us prior to purchasing an item if you have a question. We're glad to assist in any way we can. Calibration is not guaranteed unless the item is advertised as calibrated or you purchase calibration at the time of sale. We maintain a laboratory with high quality equipment in order to verify the performance of the items we sell. We can provide ANSI Z540.1 calibration services on most items sold, if desired. Please contact us for Repair, Reconditioning, or Calibration services. * Item may have some cosmetic imperfections such as scratches, dents, cracks, sticker residue, and discoloration due to normal wear and tear. Every effort is made to make our items as cosmetically acceptable as possible. Abnormal cosmetic conditions are mentioned in the item condition. (please look at our rules and privacy policy) |
Mariogeorge@modularparts.com (Mario George)
for more information. This email will be sent to Mario George' actual email address.