|
Super160P 4-in-1 Plasma Cutter and Pulse Welder FREE PEDAL AND ARGON REGULATOR 40-AMP Plasma Cutter with 160-AMP TIG AC and DC with Pulse Welding and 160-AMP Arc (MMA)Welder Guaranteed against dead on arrival or we will replace it with new unit . We are proud to introduce the EVERLAST Super160 4 in 1 40-AMP Plasma Cutter with 160-AMP TIG AC & DC and 160-AMP Arc (MMA) Welders. This EVERLAST Super160 Plasma Cutter is portable and operational on 220volts. It's light weight of only 45lbs, makes this unit a necessity at home or on the job. Everything is included for you to start cutting or welding today! IF YOU NED TO DOWNLOAD OWNERS MANUAL CLICK HERE EVERLAST AND LONGEVITY ARE IDENTICAL UNITS AND COME FROM SAME FACTORY Included: Cutting torch, TIG torch, Stick Welder, Air Regulator, and Earth Clamp 40 Amps plasma cutter: Duty Cycle 60% at 40 Amps and 100% at 30 Amps. 3/8 inches clean cut with 17 inches per minute; 1/2 inches cut with 7 inches per minute; 3/4 inches severance cut with 3 inches per minute. Rated Output Current is 40Amps under AC 220V. Works in both 50 and 60 Hz with operating air pressure as 65 psi @ 2.6 cfm 160 Amps Tig Welder: Duty Cycle 60% at 160 Amps Tig and 100% at 95 Amps Tig. Argon Gas Flow is 2.4 cfm. Air pressure is 65 psi. working under both 50 Hz and 60 Hz single phase 220 VAC. High Frequency Start with AC/DC/Pulse Welding. It can weld all stainless steel (in DC mode) and aluminum (in AC mode) 160 Amps Arc "MMA" Welder: Duty Cycle 60% at 160 Amps and 100% at 95 Amps. Portable: This machine weights only 45 lbs and measures 20 inches Length x 13 inches width x 13 inches height. The Argon Regulator is used with the TIG feature. If you want the most from the unit, we strongly recommend the regulator. * For returns, contact must be made within 48 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately. However, the damage must be reported within 48 hours of delivery * Items returned must be in an unused condition. We will inspect all returns before accepting the package. We will not accept packages that are not in original packaging, have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost. Ifyou have any questions contact us via email at: NEONBIKES@HOTMAIL.COM OR (650)588 8588 x 201 (please look at our rules and privacy policy) |
B.Reilly@modularparts.com (Brandon Reilly) for more information. This email will be sent to Brandon Reilly' actual email address.
