Lincoln Electric’s® Statiflex™ 200-M is a wall mounted, low vacuum/high volume system designed for medium duty extraction and filtration of welding fumes. The Statiflex™ 200-M is ideal for a variety of facilities in which floor space is a premium including: maintenance departments, general fabrication and welding job shops, weld schools, and industrial welding environments. The Statiflex™ 200-M can be configured as a single or dual arm system. Lincoln Electric’s® fume extraction arms are designed to provide welders optimal motion and reach for their specific welding position(s) and work area. The arm lengths range from 1 m (3 ft.) to 8 m (27 ft.) with optional EC4 extension crane. The Statiflex™ 200-M with required stationary fan is designed specifically for weld applications. The stationary fan units extract weld fume through the arm, and exhaust fumes into the Statiflex™ 200-M filter unit. The internal spark arrestor and unique LongLife® filter cartridge captures the welding fume particulate. The particulate is collected on the inside of the cartridge, minimizing exposure to particulate during filter maintenance and disposal. The Statiflex™ 200-M “single arm†system is recommended for consumable use of approximately 1500 lbs. (680 kg) of MIG wire or 1100 lbs. (500 kg) of stick or flux-cored wire before replacing. The Statiflex™ 200-M “dual arm†system is recommended for consumable use of approximately 750 lbs. (340 kg) of MIG wire or 550 lbs. (250 kg) of stick or flux-cored wrie before replacing. Filter performance will be affected by process and application variables including: base metal(s), consumables(s), and coatings (oil) if applicable. • Generous 735 CFM airflow with LFA 3.1/4.1 extraction arm and SF 2400 fan.(1) • Filter efficiency up to 99.8%. • 50 m2 (540 ft2) LongLife® filter with ExtraCoat® pretreatment. • Filter indicator gauges amount of particulate build-up in filter cartridge, indicating system maintenance and filter replacement. • Suitable for a single or dual arm system configuration. • Internal aluminum mesh spark arrestor. • One-year warranty on equipment; 30 days on filter cartridge. (1) CFM level is dependent upon arm length, fan type and system maintenance. Dimensions (in) H x W x D : 36 x 32 x 29 Dimensions (mm) H x W x D : 900 x 810 x 730 Filter, plastic housing, one 160 mm (5.75 in.) 1.0 meter (3.2 ft.) hose, two hose clamps, instruction manual and wall-mounting bracket. Feel free to call us at 920.882.0640 or Toll-Free at 1-877-532-WELD from 7:00AM-5:00PM CST with any questions on this product. (please look at our rules and privacy policy) |
E_warren@modularparts.com (Ella Warren)
for more information. This email will be sent to Ella Warren' actual email address.