|
Johnson Control Metasys NT Network Terminal IO-NTU102-0 The Network Terminal is a simple, portable, operator interface to Metasys. It plugs into a modular phone jack on any Network Control Module (NCM). With the NT connected to a networked NCM, an operator has total access to information anywhere in a facility, and can easily monitor, command, and adjust equipment connected to Metasys. Remote applications connect an NT over separate NT trunks at distances up to one mile from the NCM. The trunk is composed of phone cable (two twisted pairs) along with modem and connections kits. cess from anywhere on the network, using passwords, data paths, and item names consistent with Metasys. The NT can: ** request summaries for Alarm, Override, History, Limit, and Status ** override an object to bypass automatic start, stop, or reset operations ** change operational setpoints, or alarm and warning limits ** change the system clock, date, and daylight savings times ** display values for six objects when not logged on (Hold) ** schedule times for objects to be adjusted or commanded by adding or modifying weekly, holiday, and one time schedules The NT functions as a dumb terminal to the system. It contains a scratch pad memory of 32K bytes, which is lost when power is interrupted. The screen is a Super Twist, liquid crystal display (256 x 128), capable of showing 16 lines of 40 characters. IF THE PICTURES DOES NOT APPEAR IN ITS GIVEN SPACE, RIGHT CLICK ON THE SPACE AND SELECT SHOW PICTURE. CHECK OUT OUR STORES FOR MORE QUALITY MERCHANDISE AT A FRACTION OF RETAIL PRICE MrPowertech's Test Equipment Store VISIT OUR HEWLETT PACKARD STORE MrPowertech's Hewlett Packard Store VISIT OUR TEST AND MEASUREMENT STORE MrPowertech's Test & Measurement Store (please look at our rules and privacy policy) |
t-ramos@modularparts.com (Trisha Ramos) for more information. This email will be sent to Trisha Ramos' actual email address.
