|
500 MHz, 1 GS/sec Digitizing Oscilloscope * Installed options: 05 13 1F 1M 2F * Full software programmability and screen capture via GPIB/IEEE488 Port * Fresh NIST traceable calibration with test data, dated 12/14/07 * 05 - Video trigger (NTSC, PAL, HDTV, Flexformat) * 13 - RS232/Centronics Interface * 1F - Internal 3.5" floppy disk drive (PC-compatible format) * 2F - Advanced DSP Math w/ FFT, Integration, and Differentiation ( FFT algorithm provides Rectangular, Hamming, Hanning, and Blackman-Harris windowing functions) * 1M - 50K sample points per channel * Qty=4, P6139A 500 MHz Bandwidth Passive Probes w/ Accessories * Qty=1, P6205 750 MHz Bandwidth Active Probe * Qty=1, 013-0278-00 Video Display Clamp * Original Tektronix User manual (hardcopy) * 500 MHz maximum analog bandwidth * 1 Gigasample/second digitizing (sampling) rate * Up to 100 Gigasample/second Equivalent Time Sampling * 1 Meg ohm or 50 ohm input impedance * Input coupling: AC, DC, GND * Vertical Sensitivity: 1 mV/div to 10 V/div * 8 bits vertical resolution * Bandwidth: selectable 500 MHz (FULL), 100 MHz, 20 MHz * Sweep speed: 5 s/div to 500 ps/div * Acquisition modes: Sample, Peak Detect, Hi Res, Envelope, Average * Trigger types: edge, pulse or logic, video (option 05, NTSC, PAL, HDTV, and Flexformat) * Edge trigger coupling: AC, DC, GND, HF Reject, LF Reject, Noise reject * Trigger inputs: CH1, CH2, CH3, CH4, AC line, Auxiliary (rear panel BNC) * Record length: up to 50,000 samples per channel with 1M option * Time Base(s): Main, Delayed * 25 Automatic Measurements: (display up to four at one time) Period, Frequency, Positive Width, Negative Width, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Delay, Phase, Burst Width, High, Low, Max, Min, Peak-to-Peak, Amplitude, Positive Overshoot, Negative Overshoot, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area * Cursor Modes: Independent, Tracking * Cursor Measurements: Time/Frequency/Amplitude * Waveform Math: Invert a single waveform and add, subtract, multiply, and divide two waveforms * Advanced DSP Math Option 2F provides FFT spectral display, integration, or differentiation display of signal on selected channel * FFT algorithm provides Rectangular, Hamming, Hanning, and Blackman-Harris windowing functions * Capture and display one to four reference waveforms for comparisons and waveform math * Intuitive graphic icon operation blended with the familiarity of traditional horizontal and vertical knobs * Full GPIB software programmability via GPIB IEEE STD 488 Port * RS232/Centronics Interface (Option 13) * On-line help at the touch of a button * 90-250 Vac; 47-63 Hz operation * Weight: 27 lb (37 lb packed) * Size: 193 mm (7.6 in) Height x 445 mm (17.5 in) Width x 432 mm (17.0 in) Depth * Tektronix Model TDS 544A Digitizing Oscilloscope w/ Options: 05 13 1F 1M 2F, S/N: B012486 * Four Tektronix P6139A 500 MHz bandwidth passive probes with ground leads, alligator clips, and hook tips (high-speed probe accessories included- see photos) * One Tektronix P6205 750 MHz bandwidth active probe with ground lead and hook tip * One Tektronix 013-0278-00 Video Display Clamp * Tektronix original User manual * Tektronix documentation (on CD): * 013-0278-00 Video Display Clamp manual * TDS Family Programmer manual * TDS Family Reference Manual * Miscellaneous application notes and GPIB control software programming utilities (source code and executables) * 5-day right-of-refusal/right-of-return * Certificate of NIST-traceable Calibration and test data * 30 day non-DOA hardware warranty by the seller Right-of-return/right-of-inspection FFT of channel 1 with a 10 MHz sinusoidal signal, Cursor at 10 MHz spectral line as shown: Signal Path Compensation Internal Calibration: (please look at our rules and privacy policy) |
M-holland@modularparts.com (Mamie Holland) for more information. This email will be sent to Mamie Holland' actual email address.
