TDS544A 4 Channel 500MHz 1GS/s Digitizing Oscilloscope This unit has Bad CRT, Microprocessor or PS may also Bad, Floppy Drive has been Removed, it can be a part item The TDS544A Digitizing Oscilloscope has a 500MHz bandwidth and features a color CRT, sample rates to 1 GSa/s, 25 automatic measurements, 4 input channels, a 3.5" floppy drive, sensitivity of 1 mV to 10 V per division, time base range of 500 ps to 10 s/div, waveform Pass/Fail testing, and record lengths of up to 50,000 points. * Vertical Sensitivity: 1 mV/div to 10 V/div * Sweep speed: 5 s/div to 500 ps/div * Interfaces: GPIB, VGA out, RS-232, Centronics * 1 megohm or 50 ohm input impedance * 90-250 Vac; 47-63 Hz operation * Weight: 27 lb; Size: 193 mm (7.6 in)H x 445 mm (17.5 in)W x 432 mm (17.0 in)D * Our hours of operation are M-F, 10-5PM Pacific Standard Time. Phone: (***) 257-2445 Fax: (***) 257-6310 (please look at our rules and privacy policy) |
cathryn_shaffer@modularparts.com (Cathryn Shaffer)
for more information. This email will be sent to Cathryn Shaffer' actual email address.