|
NEW NSR-30 Quicher Screw Feeder With Power Supply and Manual Click on thumbnails for larger images. Small in size and light in weight. The simplified mechanism and high reliability. The screws are ladled out by a scoop moving vertically along a guided shaft. An oil impregnated metal bearing is used. The forced drive system is employed. The screw ladling system is modified to reduce the screw clogging. The durability of the unit is improved. The rail is supported by a flat spring suspension. The flat spring eliminates the lateral shake of the rail and facilitates the lengthwise vibration to carry the screws smoother and faster. The amplitude of the rail is adjustable to the type of screw. If the screw flow is not smooth, the inclination of the rail can be adjusted higher to let the screws flow smoother and faster. NSR Quicher can handle the various kinds of screws. It also can handle the screw assembled with washer. It can handle almost all kinds of screws with nominal length up to 20mm. With the replaceable screw rail. Eight different types of the rails can handle the screw sizes from M1.0 to M3.0 respectively. No conventional screw feeder could handle such small size screw as M1.0 or M1.2. A hopper can hold up to 400cc screws and 800cc with an additional hopper. We are committed to 100% recycling and minimizing our waste. We use 99% recycled or previously used packaging products and try to minimize our environmental impact. Please reduce, re-use and recycle and save our planet for future generations. (please look at our rules and privacy policy) |
brooke.schroeder@modularparts.com (Brooke Schroeder) for more information. This email will be sent to Brooke Schroeder' actual email address.
