|
YOUR SOURCE FOR WELDING SUPPLIES WELDING EQUIPMENT - SAFETY SUPPLIES ARCAIR SLICE PACKS - LENCO SPOT _____________________________________________________________________________________________ STICK/TIG WELDER ( STICK PACKAGE) The Maxstar 150 STL is the best of class - provides maximum portability and performance in the most compact TIG / Stick package in the industry. Dependability and performance all in one machine. Portable - in the shop or at the job site - at 13.7 lb the shoulder strap allows the operator to easily move from location to location. Auto-Line circuitry automatically connects to 115 - 230 V, single-phase power without removing the covers to relink the power source. Low OCV Stick reduces open-circuit voltage to 13 volts when power source is not in use. Adaptive Hot Start for Stick arc starts prevents electrode from sticking. Single amperage range allows operator to accurately set amperage on both 115 or 230 V primary power. Lift-Arcstart provides TIG arc starting without the use of high frequency. Built-in gas solenoid eliminates the need for bulky torch with a gas valve. Thermal overload protection with indicator lights helps prevent machine damage if the duty cycle is exceeded or airflow is blocked. STL: Provides the basic features that are required for most DC TIG or Stick welding applications. Stick pkgs come complete with: * 13 ft. (4 m) Stick electrode holder. * Protective Case: Protective carrying case. Part # 195180. * RFCS-6M: 6-pin plug. Foot pedal provides remote current and contactor control. Includes 20 ft. (6 m) cord and plug. Part # 195183. * RCCS-6M: 6-pin plug. North / south rotary-motion fingertip control fastens to aTIG torch using two Velcro straps. Great for applications that require a finer amperage control. Includes 26.5 ft (8 m) control cord. Part # 195184. * TIG Accessory Kit: TIG torch / Regulator kit. Part # 195226. * RMS-6 On / Off Control: 6-pin plug. Momentary-contact switch for contactor control. Rubber-covered pushbutton dome switch ideal for repetitive on-off applications. Includes 26.5 ft. (8 m) cord and plug. Part # 195269. * Adaptor: International style flow thru (25 mm series). Part # 195234. * Torch TIG: 150 Amps, 12 ft., Aircooled. Part # DB1712R. * Torch TIG: 150 Amps, 12 ft., Aircooled w/Flow thru. Part # DB1712RDI25. * Torch TIG: 150 Amps, 25 ft., Aircooled. Part # DB1725R. * Torch TIG: 150 Amps, 25 ft., Aircooled w/Flow thru. Part # DB1725RDI25. * Torch TIG: 125 Amps, 12 ft., Aircooled. Part # DB912R. * Torch TIG: 125 Amps, 25 ft., Aircooled. Part # DB925R. B & R WELDER REPAIR SERVICE INC. 4412 SOUTHERN BUSINESS PARK DRIVE Hours : Mon-Fri 8-5 Sat 9-12 EST Email questions to : c_tanner@modularparts.com we only accept wire transfers. Please call for our banking info. Personal checks take 2 weeks to clear (please look at our rules and privacy policy) |
c_tanner@modularparts.com (Carmen Tanner) for more information. This email will be sent to Carmen Tanner' actual email address.
