|
The Handler 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140 it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires. * Dual-gauge regulator and gas hose * Comfortable 10 ft. H10 MIG welding gun * 10 ft. work lead with clamp * Extra .030 in. (0.8mm) contact tips * 1 lb. spool of .030 in. (0.8mm) self-shielded flux cored welding wire * Weld set-up and parts information chart * Welds 24 gauge up to 1/4 inch in a single pass * Proven built-in wire feeder with quick-release drive roll lever * Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding. * Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness. * Separate "purge" setting to purge gas line and set flow rate without wasting wire * Easy access to polarity changeover includes storage holes for spare tips * Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6mm) and .030 - .035 in. (0.8 - 0.9 mm) wire * Self-resetting thermal overload and motor protection Rated Output at 20% Duty Cycle Amps Input at Rated Output, 120V/KVA/KW 115V, 60 Hz with gas valve, regulator and hose 20 (15 CSA Rating) / 2.9 (2.2 CSA Rating) / 2.5 (1.77 CSA Rating) *ALL SGWELDSTORE HANDLERS COME W/ WELDMARK LOGO STICKER (please look at our rules and privacy policy) |
P_Rivers@modularparts.com (Patrica Rivers) for more information. This email will be sent to Patrica Rivers' actual email address.
