|
12 Volt 1.25 Amp DC Power Supply Output: 12.0 volts DC 1.25 Amps 30 Watts Input: 110/240 volts AC. 50-60 Hz This Item is available wholesale. (Note: the standard PC-style power cable shown in this picture is NOT included.) This power supply will be ideal for any 12V DC item, including LCD Screens, audio and video devices, recording equipment, R/C, digital cameras, and any other electronic device that requires high quality stable DC power. This adapter will protect your valuable electronics from both spikes and dips in power, and will shut itself down if the power becomes unstable. It is then reset by being unplugged and replugged in. It is vastly superior to cheap look alike adapters, and normally retails for about 30 U.S. dollar. About the Connector: Conector Size: 5.5mm (Outside barrel)x 2.5mm (Inside Barrel) Standard for 12V 3.5 Amp Device About selecting the correct power adapter: Amperage: Amperage (Amps, A) represents the maximum load that your device can draw. You must select an adapter that is capable of the same , or HIGHER, amp rating than the device will draw. It is good to use an adapter that can handle a bigger load than your device draws, this way the adapter will run cooler and more stable. Running a 3 amp device on a 3.5 amp adapter means the adapter will not have to work as hard. Voltage: The voltage (V) of the adapter has to be an exact match with the rating of the unit you want to use it with. ˙Short circuit protection on all outputs ˙100% Burn-In tested at full load (please look at our rules and privacy policy) |
d_mclaughlin@modularparts.com (Deanne Mclaughlin) for more information. This email will be sent to Deanne Mclaughlin' actual email address.
