MODULAR PARTS MODERATED NEWSGROUP and OPINIONS EXCHANGE PLACE   >   VEHICLES   >   Accessories   >   Old   >   Kikusui COS6100 100MHZ analog oscilloscope w/probes

Kikusui COS6100 100MHZ analog oscilloscope w/probes


Submitter: lmcgee@modularparts.com (Leslie Mcgee)
What Leslie Mcgee is selling: Kikusui COS6100 100MHZ analog oscilloscope w/probes
Your Source for Quality Reconditioned Test Equipment. We are the best VALUE in test and measurement!
Kikusui COS6100 100MHz Analog Oscilloscope
with Probes and Cover, no Handle
Check out our other great test equipment
Description: The Kikusui COS6100 is a very flexible 100MHz bandwidth analog oscilloscope. Channel 1 and 2 sensitivity is 5mV/div to 5V/div with 1 MOhm 20 pF input impedance. Channel 3 has sensitivities of 0.1 or 1V/div. Channels 4 and 5 allow viewing of the A or B External Trigger inputs. Vertical display modes are any combination of Ch1, Add, Ch2, Ch3, and Trig View. An X-Y mode is also available.
A trigger selection sources are INT (Ch1, Ch2, Ch3, Alt), LINE, EXT, or EXT/10 with AC, HF Reject, TV, or DC coupling. Horizontal display modes are A, A Intensified, ALT, and B(Dly'd). A Sweep modes are Auto, Normal, and Single. A Sweeps times are 20 nSec/div to 0.5 sec/div.
Includes 2 new 100MHz switchable x1/x10 probes and a front cover.
Condition: Will be Reconditioned and Performance Tested to meet manufacturers specifications. Clean unit inside and out. Physically inspected, hardware re-torqued, connectors treated with a preservative, controls and switches lubricated as appropriate, power supply electrolytics tested. Burned in for 72 hours and then performance tested. All knobs and switches are in good condition.
What do our grades mean? Click Here
Please contact us prior to purchasing an item if you have a question. We're glad to assist in any way we can.
Calibration is not guaranteed unless the item is advertised as calibrated or you purchase calibration at the time of sale. We maintain a laboratory with high quality equipment in order to verify the performance of the items we sell. We can provide ANSI Z540.1 calibration services on most items sold, if desired. Please contact us for Repair, Reconditioning, or Calibration services.
* Item may have some cosmetic imperfections such as scratches, dents, cracks, sticker residue, and discoloration due to normal wear and tear. Every effort is made to make our items as cosmetically acceptable as possible. Abnormal cosmetic conditions are mentioned in the item condition.
(please look at our rules and privacy policy)
Contact lmcgee@modularparts.com (Leslie Mcgee) for more information. This email will be sent to Leslie Mcgee' actual email address.