|
GiantTECH Cut40A AIR PLASMA CUTTER 40 AMPS-(adjustable from 10 to 40) Cuts .5" steel at 6 inches per minute! WHAT YOU GET & TWO SCROLLS DOWN FOR DEMO VIDEOS: * Plasma Cutter - Inverter Unit * Ground Cable of 8' & ground clamp * 11 each of a ceramic shield cup and swirl ring * Phone support 7 days a week between 9am and 9pm EST * Air filter/regulator, hose, clamps, mounting bracket Additional Requirements not provided by us: * Air supply required - 4 CFM @ 70 PSI * 120/240 VAC power source & plug Check out our videos. Watch this plasma cutter free hand cutting and piercing of 1/4" mild steel... Watch another video of our plasma cutter cutting duct work. http:// /watch?v=SC6Q67ZLvgA Duty Cycle 60% @ 40 Amps and 100% @ 30 Amps. 0.50 inches rated cut at 6 inches per minute. Rated Output Current is 40Amps @ 240VAC. Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm. Portable: Machine weighs only 19 lbs is 16 inches long x 6 inches wide x 9 inches high. This machine comes with torch, ground clamp and cables, air filter/regulator. Machine is equiped with a large cooling fan. Thermostaticly protected for a longer life span. Advanced inverter technology, high cutting frequency. Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm. The newer semiconductor circuits in these machines are designed quite well. With reasonable care it should provide many years of trouble-free service. Comes with a full ONE YEAR Warranty on both parts and labor USA BASED. Sorry but returns are not accepted.If you have a problem with the machine our warranty protects you. You may also call us any time between 9am and 9pm EST. if you have any questions... (***)-764-9942 THANK YOU FOR CONSIDERING GiantTECH (please look at our rules and privacy policy) |
deanawoodard@modularparts.com (Deana Woodard) for more information. This email will be sent to Deana Woodard' actual email address.
